Installation

The Line Hunter is a rack mounted panel that is designed to be screwed into a standard (EIA) 19.00" or 23.00" equipment tack cabinet or wall bracket using four 5/8" x 12-24 screws (supplied).

 

 

  1. Slide Line Hunter into equipment rack and secure with 4 screws.
     

  2. Plug the AC power cord into AC receptacle.
     

  3. Program DIP switch (if factory default settings are not suitable for application).
     

  4. Insert device patch cords in appropriate port on Line Hunter panel. Use standard 6 or 8 position modular plugs.