Tones / Programming Commands

THE STICK PROGRAMMING AND QUICK REFERENCE GUIDE

Register  Number

Programmable
Feature

Program
Range

Factory
Preset

Programming  
and Installation
Recommendations

Your Program

01

FAX Tone Detection

0 = off
1 = on

ON

Regardless of how you install the Stick, if a FAX/PC FaxCard is used-Program this feature "ON"

02

Protected Hook

Flash

0 = off
1 = on

OFF

With older KEY and PBX systems, you may need to

program this feature "ON"

03

Unanswered Call

Silent Transfer

0 = off
1 = on

OFF

"UCST" routes all unanswered after-hours calls to

fax or modem ports (on any installation) -

program "ON"

04

Silent Transfer

Destination

0 = fax

1 = modem

FAX

This feature determines what device will receive a call after it has been "silently transferred"

05

Pulse Detection

0 = off

1 = on

OFF

If you have pulse-dial phones and wish to transfer or "grab" a call-program this feature "ON"

06

Call Override

0 = off

1 = on

OFF

If The Stick is installed at a wall jack and you want to answer a call from any extension phone - program "ON"

07

Unrestricted Manual

Transfer

0 = off

1 = on

ON

Gives transfer ability at any time, from either party from any phone, recommended programming "ON"

08

Answering Machine

Silent Transfer

0 = off

1 = on

OFF

After answering machine times out, call will be routed to fax or modem port (any installation) - program "ON"

11

Security Access Code

for VOICE Ports

Digits 0-9 * and #

4 digits max.

*1

This register contains the code for transfer of a voice or modem call to devices connected to voice 1 & 2 ports

12

Security Access code for FAX Port

Digits 0-9 * and # 4 digits max.

*2

This register contains the code for transfer of a voice or modem call to FAX / PC FaxCard CONNECTED to fax port

13

Security access code for MODEM Port

Digits 0-9 * and # 4 digits max.

*3

This code is usually sent by calling modem - we recommend programming a 4 digit code for security purposes

14

Rings to answer

0 to 10 Rings

0 Rings

If The Stick is used on a KSU or PBX set to "0" - home installs w/ext. phone access, program needed no. of rings

15

Maximum rings

4-30 Rings

8 Rings

This feature controls the number of times a device (voice, fax, modem) is rung by the stick before dropping the call