Caller ID Compatibility

Call ID

The STICK is compatible with Caller ID (CID), a service available from the phone company. In the U.S. and Canada, CID is transmitted as a Bell 202 modem signal between the 1 st and 2 nd rings. The Stick default factory setting is one ring to answer; therefore the “rings-to-answer” count must be changed to at least two or more rings to accommodate the passing of the Caller ID info..

Simply make the following programming change to delay the Rings-To-Answer Count in Register 14 to 2 (minimum).

• From a touch-tone phone on the STICK, make a call to another number (like your cell phone) then enter the following from the keypad,
• Enter ##77 then wait for triple tone (be-be-beep),
• Enter 142 then wait for double(be-beep) and triple tone (be-be-beep),
• Enter 80 then you will hear two double tones indicating save and exit.
• You are done programming. CID will now be received through the STICK on all incoming calls.

Installation: