Included with The Stick are additional items that make life a whole lot easier. Please check the box and make sure you have:
The Stick
One 12 Volt Class 2 Power Source
One Silver Modular Line Cord
If any of these items are missing, please alert the Sales Department toll free at 1-866-337-0965 and also Technical Support at 1-800-535-4651
POWER UP
The first thing you must do before programming The Stick is to "power
up" the unit. It is recommended that you choose a power outlet close
to a telephone wall jack. Plug the power supply (supplied) into the 110
volt outlet and insert the barrel plug into the port labeled:
USE ONLY WITH
12 VAC 0.8-1.0A
CLASS 2
POWER SOURCE
At the rear of the unit, the red light beside "The Stick" logo
should be lit at this time.
CONNECTING TO THE PHONE LINE
Before programming The Stick, you will need to install it
on your existing telephone line and connect a touch-tone (DTMF) telephone
to the port labeled "VOICE 1" at the bottom of the unit.
A silver Modular Line Cord has been supplied for connecting The Stick to a phone line. Plug one end of the line cord into the port labeled "LINE". Plug the other end into a telephone wall jack. At this time you should hear dial tone when the handset on your touch-tone phone is lifted off-hook.