IP Power Stone® 4000
Two Outlet Remote AC Power Controller
Reboot equipment via internet or phone
The IP Power Stone 4000 ® is made in the USA.IP Power Stone 4000 Online Manual (PDF)
How does the The Power Stone® 4000work?
Control power to connected equipment "Automatically" using one of three Automatic Operating Modes.
Or control power "Passively" until access it through your computer or call in via phone using touch tone commands.
The IP Power Stone uses North American standard NEMA 5-15 AC connectors and has a broad auto-sensing voltage range from 110-250V @ 15 amps (10 amps @ 220V). This makes it easy to use on power mains anywhere in the world, providing compatibility with global networks for international support.
Ask our technicians
TOLL FREE: 866.337.0965
For the support organization with a growing number of remote site devices to maintain, but fewer personnel to maintain them, remote site management tools are essential.
Dispatching a technician to a site located hours away for a simple power reboot is costly and time consuming. The IP Power Stone is a cost effective way to solve problems from the operations center, or even from on the road.
Commands for equipment power inquiries, power On/Off, and reboot can be given to the IP Power Stone via the internet using any browser. Control access is secured by user name, password, and port number.
In addition to its in-band TCP/IP control, the IP Power Stone features automatically enabled out-of-band functionality in the event of a network outage. Any or all of the features may be used simultaneously, making it an all-in-one solution for remote site maintenance.
The IP Power Stone is intelligent enough to reboot itself. The autoreboot feature is available with self pinging and automatic network fault detection. In the event of a hung condition the IP Power Stone will
This can resolve issues without significant downtime or dispatch of support personnel. If the reboot is unsuccessful, the Telco ring reboot feature is enabled for reset via phone call. This out-of-band access is useful for field techs with mobile phones and is vitally important when the in-band path is lost.
Where equipment lock-ups are not a problem, the IP Power Stone can provide benefit by allowing equipment to be powered up only when needed. Power consumption is then reduced, saving money, and product life is extended.
Equipment is shielded from hackers when not powered on.
The Power Stone® 4000 can save you a fortune! How?
Think about the time, effort and expense to travel to a remote location for a simple reboot or to check power status.
With The Power Stone® 4000 you won't miss opportunities or waste resources.
DHCP or STATIC IP ADDRESS
DISTINCTIVE RING DETECTION
MANUAL OVER-RIDE BUTTON
TOUCH TONE OVER-RIDE
SELF SENSING POWER
POWER FAILURE INFORMATION
SECURITY ACCESS CODES
INSTALLS ON EXISTING PHONE LINE
REMOTE PROGRAMMING AND
ONE YEAR LIMITED WARRANTY
Model Number: IP4000
Switched Outputs: 110- 125V AC/50-60Hz, 15 Amps, or 220V/50Hz, 10 Amps
Mech. Relay Duty Cycle: 20 Million Operations at 18,000 Operations per hour
Connectors: (1) RJ-45 10Mbps Ethernet, (2) AC Receptacles (IN/OUT) or (3) RJ-11 Telco/Control
Physical: 6.25" W x 4.25" D x 2.25" H, 1 lb
LED's: (3) In/Out, Status
Switches: (1) Rocker/circuit breaker, (1) On/Off/Reset push button
Ringer Equivalence: 1.1 B
Cable: (1) 7' R1-11 Phone Cable and (1) 3' CAT-5 Cable
Adaptor: (2) R.I-11 to 9 pin (for Configuration/Control port)
AC Power: 115V/50-60Hz, 15 Amps to 220V/50Hz, 10 Amps
IP Address Admin: DHCP or Static
Warranty: 1 year limited
Copyright © Multi-Link, Inc. 2014
THE Power Stone ® 4000 is a registered trademark of Multi-Link, Inc.