Remote Power Controller
Reset/Reboot Equipment with any Touch Tone Telephone
The Power Stone ® is made in the USA.
The Power Stone® reboots remote equipment by phone!
Product Overview
The Power Stone is a telephone activated remote AC power controller that can perform a variety of functions relating to the supply of 120V AC power to any connected equipment.
The Power Stone enables the user to power up, power down, or reboot remote equipment through a single line automatically or manually!
It does not need a dedicated phone line to operate. It quickly installs on an existing line!
PART#PST59102
The Power Stone also saves you energy costs by allowing you to only power-up remote equipment, such as LCDs, videowall displays, and digital banners when you need it.
When you combine energy costs savings and service call savings while operating it all remotely, you'll be giving the term "Green" a whole new meaning!
Application Flexibility
The Power Stone has the flexibility to tackle the most
demanding remote applications.
Select from Automatic or Manual operations.
Automatic Operation
The Power Stone will control power automatically upon
detecting the rings from an inbound call. Choose "Rings-to-trip" or "Constant on/off' settings:
• Power on Call - The Power Stone supplies power during
the call, then powers down two minutes after the call
terminates.
• Reboot - Detecting a call, The Power Stone interrupts
power for 15 seconds, then supplies power again.
• Toggle - With each incoming call, The Power Stone
supplies or cuts power to the connected device.
• Constant Mode - The Power Stone ignores call activity, and stays "constant on" or "constant off' until you manually change operation.
Manual Operation
Call in to The Power Stone from any touch tone phone to manually control power or change automatic settings.
Pass code protected.
Features
FULLY PROGRAMMABLE
Control and program via touch tones. No
software or drivers to install.
AUTOMATIC MODE
Automatically activated by an inbound call and executes user defined power command.
DISTINCTIVE RING DETECTION
Use a "Distinctive Ring" number as the only means to "trip" The Power Stone's operation is a great way to power up your PC.
MANUAL OVER-RIDE BUTTON
One touch for uninterrupted power.
TOUCH TONE OVER-RIDE
There is a touchtone command that will perform the same fúnction as pressing
the OVERRIDE button.
120 VOLT, 15 AMP RATING
Tackles the most demanding power
applications.
POWER FAILURE INFORMATION
Status Register will tell you if a power failure has
occurred since the last reading of this register.
PROGRAMMABLE SECURITY
ACCESS CODES
User defined access codes provide
security and control.
NON-VOLATILE MEMORY
Preserves programming in power outage.
INSTALLS ON EXISTING PHONE LINE
No need for dedicated phone line.
REMOTE PROGRAMMING AND
DIAGNOSTICS
Our tech support team is available toll-free
to program The Power Stone over
the phone.
ONE YEAR LIMITED WARRANTY
The Power Stone can save you a fortune! How?
Consider
the cost (or lost opportunity) if you were unable to retrieve critical
information from a remote system. Think about the time, effort and expense
to travel to a remote location for a simple reboot or to check power status.
With The Power Stone you won't miss opportunities or waste resources.
Common Uses
- Determine if a Power Outage has Occurred
- Determine if Power is Currently being Applied
- Reboot / Power Down off-site Systems
- Eliminate Unnecessary Site Visits
- Reduce Power Consumption by Leaving Equipment "OFF" Until Needed
| Download Manual: | Power Stone Zip (807k) |  |
| Download Manual: | Power Stone PDF(980k) |  |
Many Benefits
•Saves Money - The Power Stone pays
for itself with one saved service visit
• Reduces Downtime - One phone call
can correct problem equipment in
minutes
• Protects Equipment - Leave
equipment "off" until needed.
•Saves Energy - Reduces power consumption
•Protects Data - Reduces
hacker exposure
• Application Flexibility — Automatic
and Manual operations for versatility in a variety of applications
- Routers
- DSL Modems
- Automated Teller Machines (ATM)
- Internet Kiosks
- Leased Telephone Systems
- Network Equipment
- Digital Video
- Recorders
- Voicemail Systems
- Equipment Under Service Warranty
- Out-of-Band Network Management
- PC Lock-ups
- Network Systems
- Sales Terminals
- Monitoring Systems
- Telecommuting
- Phone Systems
- Terminal Adapters
- Channel Banks
- Home Security
- Lighting
- Power Status
How does it Stone work?
The Power Stone passively monitors the phone line and does not actively "interface"
with any equipment connected to the phone line.
The feature-rich power controller offers you a wide variety of operating modes to
fit your specific application.
Control power to connected equipment "Automatically" using one of three Automatic Operating Modes. Or control power "Passively" until you call in and input your security access code to direct functions using touch tone commands.
Free Technical Support
Our staff of technicians is available to answer any questions you may have about programming orinstallation. We can even test and program your unit over the phone! We are available before and after the sale to
ensure your satisfaction and optimal performance for your application.
TOLL FREE: 866.337.0965
International: +1 217.337.0965
