Command Communications ComSwitch® CS7500 Telephone Line Sharing System/Fax Switch
ComSwitch® CS7500 Telephone Line Sharing System/Fax Switch
Description:
Command Communications ComSwitch® CS7500 Telephone Line Sharing System/Fax Switch Eliminate the need for extra dedicated telephone lines with the ComSwitch 7500.
1 or 2 Telephone Lines--even 2-line telephones, 4 Device Ports (2 Ports Are Linked)--usually an answering machine, phone, fax and modem.
Use the ComSwitch 7500 fax switch to automatically route calls to your phone, answering machine, fax and modem - all on a single line!
Choose Automatic or Semi-Automatic operation. (Telephone line sharing device - fax switch.)
The Comswitch 7500 is discontinued. The replacement is The Stick is you use tone detection. The SR-3 is the replacement if you use distinctive ring service.
More information and more specific products are avaliable at faxswitch.com.
Feel free to call us toll free at 1-866-337-0965 for help, more informations, for advice or to order by phone.
Superior replacement products are currently manufactured by Multi-Link, Inc. in the USA and may be purchased online at faxswitch.com.
Command Communications is no longer in business and does not support its products anymore.
Fortunately, Multi-Link, Inc has be manufacturing similar but superior products for over 25 years. Feel free to call toll free at 1-866-337-0965 for assistance in replacing your comswitch or finding an exact product for your particular application.
The correct product to replace the 7500 is most likely The Stick. The Stick is a tone detection product that automatically routes calls to the proper device without the need for any additional phone company services.
If you use distinctive ringing service to route your calls the correct replacement would be the SR-3. Since the SR-3 is a different technology it learns the voltages of your local phone company distinctive ring service so it can't ever make a mistake.
Neither of these products notify another number you have a call like Command claims they did. Unlike the Commswitch 7500, The Stick and the SR-3 are 100% accurate so you should not need this feature.
The only differences in The Stick and the Comswitch 7500 in the tone detect mode is The Stick only has the automatic mode whereas the 7500 offered semi-automatic and automatic modes. Faxswitch.com has another product that does do the semi-automatic mode if this is necessary called the FaxJack which does everything the Comswitch 7500 does except the call notification plus more if you need these extra seldomly required features.
If you use distinctive ring, the SR-3 is a better alternative. Your voice calls always go to the voice, fax calls always go to your fax and your alternative calls on the second distinctive number always go to the assigned device. There should be no need to manually transfer any calls. Since the SR-3 is 100% accurate, we didn't include this feature because frankly unless the unit malfunctions you don't need it.
We also have the Versa-Link ATX-250 automatic or distinctive ring 2 device fax switch which will also do the manual transfer from your phone if you require it.
The superior replacement for the 7500autimatic fax or modem detection is The Stick. For distinctive ring is the SR-3. Since they are 100% accurate, has surge and lightening protection as well as all parts in the manufacturing are specified for a minimum of 40 years, which the Command product never had. We are thoroughly confident that you will much happier with it. It shouldn't wear out. 40 years is a long time. I have personally used the SR-3 for my voice and fax. For me, it has been 100% accurate and perfect for more that 25 years. Perfection is hard to beat.
For distinctive ring, the SR-3 is simpler than the 7500. It does only one thing. It routes the calls from the distinctive ring to the appropriate device and never makes mistakes. To repeat, it is 100% accurate.
Instead of having two or three phone lines, it allows you to have only one phone line with distinctive ring (you only pay for one phone line plus the distinctive ring option instead of paying for three lines which obviously almost cost you 3 times as much) for virtually the same functionality.
Bacically it works the same as having two or three lines except you can't use them at the same time.
With The Stick calls are routed to either the voice, fax or modem automatically on your single existing phone line. The Stick is our most popular product. It is basically like an invisible secretary that automatically routes your calls to the correct device without the caller being aware that it isn't a dedicated line.
To learn more information about The Stick which is the most popular fax switch in the world or the 100% reliable SR-3 for distinctive ring go to:
http://faxswitch.com
Command Communications ASAP® 2080 Commercial Grade Line Sharing For Up To Eight Devices
Command Communications ASAP® 2080
Commercial Grade Line Sharing For Up To Eight Devices
Description:
Command Communications ASAP® 2080 The ASAP 2080 is a new 2X8 line-sharing device that is compact and easy to install, with a price that makes it an exceptional value.
It can be used with almost any type of phone system, from a single line to a KSU/PBX. And with its small footprint and wall-mounting capability, you can install the ASAP 2080 just about anywhere.
The ASAP 2080 has a total of 11 LED indicators: one for power, one for Line 1,one for Line 2 and one for each of the eight ports.
When a port is in use, its LED will be red when connected to Line 1 or green for Line 2.If a port device is locked up; its LED will flash rapidly.
The ASAP® 2080 is discontinued.
Contact us at 1-866-337-0965 for advice on replacing the ASAP® 2080.
More information and more specific products are avaliable at faxswitch.com.
Command Communications ASAP® DR401 Specially Designed Ring Detection System
Command Communications ASAP® DR401 Specially Designed Ring Detection System
Description:
The ASAP DR 401 offers powerful, technically advanced features for custom applications.
The ASAP DR 401 is compatible with the Telco's Distinctive Ring, Caller ID (in parallel), Call Waiting and Voice Mail. The ASAP DR 401 Distinctive Ring Call Manager is used in conjunction with the Distinctive Ring service provided by the local phone company. The ASAP DR 401 provides a cost-effective method of directing calls to the correct device without the extra monthly service charge of additional dedicated telephone lines.
This product is no longer manufaactured and is discontinued.
The ASAP DR 401 is discontinued. The replacement is The Stick is you use tone detection. The SR-3 is the replacement if you use distinctive ring service.
More information and more specific products are avaliable at faxswitch.com.
Feel free to call us toll free at 1-866-337-0965 for help, more informations, for advice or to order by phone.
Superior replacement products are currently manufactured by Multi-Link, Inc. in the USA and may be purchased online at faxswitch.com.
Command Communications is no longer in business and does not support its products anymore.
Fortunately, Multi-Link, Inc has be manufacturing similar but superior products for over 25 years. Feel free to call toll free at 1-866-337-0965 for assistance in replacing your comswitch or finding an exact product for your particular application.
The correct product to replace the ASAP DR 401 is most likely The Stick. The Stick is a tone detection product that automatically routes calls to the proper device without the need for any additional phone company services.
If you use distinctive ringing service to route your calls the correct replacement would be the SR-3. Since the SR-3 is a different technology it learns the voltages of your local phone company distinctive ring service so it can't ever make a mistake.
One difference in The Stick and the ASAP DR 401 in the tone detect mode is The Stick only has the automatic mode whereas the ASAP DR 401 offered semi-automatic and automatic modes. Faxswitch.com has another product that does do the semi-automatic mode if this is necessary called the FaxJack which does everything the ASAP DR 401 does except emergency barge-in.
If you need the emergency barge-in feature, The PolNet ACP Series would be your best choice. We offer the Polnet Series in 3 different models, ACP-3 (3 Devices), ACP-5 (5 Devices) and the ACP-9 (9 Devices).
If you use distinctive ring, the SR-3 is a better alternative. Your voice calls always go to the voice, fax calls always go to your fax and your alternative calls on the second distinctive number always go to the assigned device. There should be no need to manually transfer any calls. Since the SR-3 is 100% accurate, we didn't include this feature because frankly unless the unit malfunctions you don't need it.
We also have the Versa-Link ATX-250 automatic or distinctive ring 2 device fax switch which will also do the manual transfer from your phone if you require it.
The superior replacement for the ASAP DR 401 automatic fax or modem detection is The Stick. For distinctive ring is the SR-3. Since they are 100% accurate, has surge and lightening protection as well as all parts in the manufacturing are specified for a minimum of 40 years, which the Command product never had.
For distinctive ring, the SR-3 is simpler than the ASAP DR 401. It does only one thing. It routes the calls from the distinctive ring to the appropriate device and never makes mistakes. To repeat, it is 100% accurate.
Instead of having two or three phone lines, it allows you to have only one phone line with distinctive ring (you only pay for one phone line plus the distinctive ring option instead of paying for three lines which obviously almost cost you 3 times as much) for virtually the same functionality.
Bacically it works the same as having two or three lines except you can't use them at the same time.
With The Stick calls are routed to either the voice, fax or modem automatically on your single existing phone line. The Stick is our most popular product. It is basically like an invisible secretary that automatically routes your calls to the correct device without the caller being aware that it isn't a dedicated line.
Command Communications ASAP® 104 Advanced Voice/Data Switching System
Command Communications ASAP® 104 Advanced Voice/Data Switching System
Description:
The ASAP 104 provides true 4-port, automatic telephone line sharing and is compatible with telephone company Distinctive Ring, Voice Messaging and Caller ID.
The ASAP 104 allows emergency call interruption of data calls (when used with the ASAP Dispatcher DP1, or Call Conferencing). Install at the DEMARC or connect directly to a telephone extension outlet The ASAP 104 will answer the call on the first ring. Once the call is answered, the ASAP 104 listens for call routing signals. The new wall-mount case with 4-way line cord guides and mounting accessories kit assure a clean installation every time.
This product is no longer manufaactured and is discontinued.
The replacement is the SR-3 Distinctive Ring Call Processor.
Command Communications is no longer in business and does not support its products anymore.
Fortunately, Multi-Link, Inc has be manufacturing similar but superior products for over 25 years. Feel free to call toll free at 1-866-337-0965 for assistance in replacing your comswitch or finding a superior product for your particular application.
The correct product to replace the ASAP 104 is most likely the SR-3. It does everything that the Command ASAP ASAP 104 does except notify you have a call waiting call. Unlike the Commswitch ASAP 104, the SR-3 is 100% accurate so you should not need this feature. Since the SR-3 is a different technology it learns the voltages of your local phone company distinctive ring service so it can't ever make a mistake.
The SR-3 selective ring call processor saves money by eliminating unnecessary phone lines. The SR-3 routes up to three numbers per line. It installs on a standard POTS line and does not go “off hook” to screen but routes to the appropriate port based on the signature ring pattern for each phone number assigned to a single phone line.
The primary phone number routes to port one, secondary number to port two, etc. Multi-Link’s “Smartware™” technology eliminates any user programming by automatically learning the ring cadence. Operation is totally automatic. The barge-in protection feature is optional. Outbound calls are processed in the normal fashion.
Your voice calls always go to the voice, fax calls always go to your fax and your alternative calls on the second distinctive number always go to the assigned device. There should be no need to manually transfer any calls. Since the SR-3 is 100% accurate, we didn't include this feature because frankly unless the unit malfunctions you don't need it.
We also have the Versa-Link ATX-250 automatic or distinctive ring 2 device fax switch which will also do the manual transfer from your phone if you require it.
The superior replacement for the ASAP 104 for distinctive ring is the SR-3. Since it is 100% accurate, has surge and lightening protection as well as all parts in the manufacturing are specified for a minimum of 40 years, which the Command product never had. The SR-3 is made in America.
The ASAP 104 was made in China.We are thoroughly confident that you will much happier with it plus it supports American jobs and industry.
It shouldn't wear out. 40 years is a long time. I have personally used the SR-3 for my voice and fax. For me, it has been 100% accurate and perfect for more that 25 years. Perfection is hard to beat.
The SR-3 is simpler than the ASAP 104. It does only one thing. It routes the calls from the distinctive ring to the appropriate device and never makes mistakes. To repeat, it is 100% accurate.
Instead of having two or three phone lines, it allows you to have only one phone line with distinctive ring (you only pay for one phone line plus the distinctive ring option instead of paying for three lines which obviously almost cost you 3 times as much) for virtually the same functionality.
Bacically it works the same as having two or three lines except you can't use them at the same time.
To learn more information about the 100% reliable SR-3 go to:
http://faxswitch.com/sr3.html
Command Communications ComSwitch® CS5500 Telephone Line Sharing System/Fax Switch
Command Communications ComSwitch® CS5500 Telephone Line Sharing System/Fax Switch Descriptions:
Command Communications ComSwitch® CS5500 Telephone Line Sharing System/Fax Switch Eliminate the need for extra dedicated telephone lines with the ComSwitch 5500. 1 Telephone Line, 3 Device Ports (2 Ports Are Linked)--usually an answering machine, phone, fax or modem.
Use the ComSwitch 5500 fax switch to automatically route calls to your phone, answering machine, fax or modem - all on a single line! Choose Automatic or Semi-Automatic operation.
The replacement for the Comswitch 5500 is the SR-3 Distinctive Ring Call Processor.
The Comswitch 550 and all of the Command Communications products have been discontinued and are no longer supported or manufactured. Command Communications officially closed its doors in 2011.
More reliable replacement products are currently manufactured by Multi-Link, Inc. in the USA and may be purchased online at faxswitch.com.or toll free at 866-337-0965.
Command Communications is no longer in business and does not support its products anymore.
Fortunately, Multi-Link, Inc has be manufacturing similar but superior products for the largest and the smallest business in the world. We also serve the military, universities, schools, municipal departments, government agencies, non profits and many more categories of businesses.
The correct product to replace is most likely the SR-3. It does everything that the Comswitch 5500 does except the manual transfer which is unnesessary.
Unlike the Comswitch 550, the SR-3 is 100% accurate so you should not need this feature. Since the SR-3 is a different technology it learns the voltages of your local phone company distinctive ring service so it can't make a mistake.
Your voice calls always go to the voice, fax calls always go to your fax and your alternative calls on the second distinctive number always go to the assigned device. There should be no need to manually transfer any calls. Since the SR-3 is 100% accurate, we didn't include this feature because frankly unless the unit malfunctions you don't need it. The SR-3 is 100% accurate. When the producr is perfect, you don't need excuses or work arounds.
If for some reason that you do require the manual transfer mode, we do have the Versa-Link ATX-250 which will also do the manual transfer from your phone if you require it.
We offer several different products for sharing voice, fax or modem applications. If you have any questions or need expert advice about your specific application, please call us at 1-866-337-0965. We want you to have the right product so don't hesitate to call. We are happy to help you. We like happy customers.
The superior replacement for the CS 5500 for distinctive ring is the SR-3. Since it is 100% accurate, has surge and lightening protection as well as all parts in the manufacturing are specified for a minimum of 40 years, which the Command product never had. We are thoroughly confident that you will much happier with it. It shouldn't wear out. 40 years is a long time. I have personally used the SR-3 for my voice and fax. For me, it has been 100% accurate and perfect for more that 25 years. Perfection is hard to beat.
The SR-3 is simpler than the CS 5500. It does only one thing. It routes the calls from the distinctive ring to the appropriate device and never makes mistakes. To repeat, it is 100% accurate.
Instead of having two or three phone lines, it allows you to have only one phone line with distinctive ring (you only pay for one phone line plus the distinctive ring option instead of paying for three lines which obviously almost cost you 3 times as much) for virtually the same functionality.
Basically it works the same as having two or three lines except you can't use them at the same time.
To learn more information about the 100% reliable SR-3 go to:
http://faxswitch.com/sr3.html
Command Communications ComSwitch® CS3.0 Telephone Line Sharing System/Fax Switch
Command Communications ComSwitch® CS3.0 Telephone Line Sharing System/Fax Switch Descriptions:
Command Communications ComSwitch® CS3.0 Telephone Line Sharing System/Fax Switch Eliminate expensive extra phone lines. The leader in Fax Switching adds TeleZapper® technology and Call Waiting Alert while you’re online.
The ComSwitch 3.0 provides the three most useful features you’ll ever add to your telephone line, all in one simple device. SWITCHES - automatically to your phone, fax or answering machine! All on one telephone line! ZAPS - to keep many telemarketers out! ALERTS - you to incoming calls or faxes while online!*
The replacement is the SR-3 Distinctive Ring Call Processor.
Command Communications is no longer in business and does not support its products anymore.
Fortunately, Multi-Link, Inc has be manufacturing similar but superior products for over 25 years. Feel free to call toll free at 1-866-337-0965 for assistance in replacing your comswitch or finding a superior product for your particular application.
The correct product to replace the CS 3.0 is most likely the SR-3. It does everything that the Comswitch CS 3.0 does except notify you have a call waiting call. Unlike the Commswitch CS 3.0, the SR-3 is 100% accurate so you should not need this feature. Since the SR-3 is a different technology it learns the voltages of your local phone company distinctive ring service so it can't ever make a mistake.
The SR-3 selective ring call processor saves money by eliminating unnecessary phone lines. The SR-3 routes up to three numbers per line. It installs on a standard POTS line and does not go “off hook” to screen but routes to the appropriate port based on the signature ring pattern for each phone number assigned to a single phone line.
The primary phone number routes to port one, secondary number to port two, etc. Multi-Link’s “Smartware™” technology eliminates any user programming by automatically learning the ring cadence. Operation is totally automatic. The barge-in protection feature is optional. Outbound calls are processed in the normal fashion.
Your voice calls always go to the voice, fax calls always go to your fax and your alternative calls on the second distinctive number always go to the assigned device. There should be no need to manually transfer any calls. Since the SR-3 is 100% accurate, we didn't include this feature because frankly unless the unit malfunctions you don't need it.
We also have the Versa-Link ATX-250 automatic or distinctive ring 2 device fax switch which will also do the manual transfer from your phone if you require it.
The superior replacement for the CS 3.0 for distinctive ring is the SR-3. Since it is 100% accurate, has surge and lightening protection as well as all parts in the manufacturing are specified for a minimum of 40 years, which the Command product never had. We are thoroughly confident that you will much happier with it. It shouldn't wear out. 40 years is a long time. I have personally used the SR-3 for my voice and fax. For me, it has been 100% accurate and perfect for more that 25 years. Perfection is hard to beat.
The SR-3 is simpler than the CS 3.0. It does only one thing. It routes the calls from the distinctive ring to the appropriate device and never makes mistakes. To repeat, it is 100% accurate.
Instead of having two or three phone lines, it allows you to have only one phone line with distinctive ring (you only pay for one phone line plus the distinctive ring option instead of paying for three lines which obviously almost cost you 3 times as much) for virtually the same functionality.
Bacically it works the same as having two or three lines except you can't use them at the same time.
To learn more information about the 100% reliable SR-3 go to:
http://faxswitch.com/sr3.html