Versa-Link ATX250® Distinctive Ring Automatic Call Processor Phone/Fax/Modem Switch Automatic or Distinctive Ring Mode The Versa-Link ATX-250 (ATX) allows two telephony devices to share a single telephone line, eliminating costly phone lines that routes calls based on either distinctive ring service or automatic tone detection (CNG and DTMF tones). The Versa-Link ATX-250 is an automatic call processor that routes calls based on Distinctive Ring, Comfort Noise Generator (CNG) and Dual-tone Multi-frequency (DTMF) tones to phones, a fax, modem, or any other device. Dip switches on the device allow for easy programming. This call switch can also be used with any Selective or Distinctive Ring Service offered by local telephone companies in North America. In Selective Ring mode, the unit will route inbound calls to the appropriate device based on the ring cadence of each distinctive ring number. Barge-in protection keeps your data transmission free from interruption. A busy signal is heard when other devices attempt to use the outgoing line. Benefits • Saves money by eliminating costly dedicated phone lines • Secures dial‐up modems from hacker exposure • Automatically directs calls to phone, fax, or dial‐up modems • Shares 2 analog phone devices with one phone line. Applications: Voice Fax Switch Fax Modem Switch Voice Modem Energy / Climate Control Systems Out‐of‐Band Network Access Telephony Firewall Utility Meter Reading HVAC Control Monitoring Substation Communications Traffic Control Management Point‐of‐Sale System Integration Modem Polling Fuel Tank Monitoring Service Port Access SCADA Interrogation Remote Kiosk Administration Product Description : The Versa-Link is an automatic call processor that routes calls based on Comfort Noise Generator (CNG) and Dual-tone Multi-frequency (DTMF) tones to phones, a fax, modem, or any other device. Dip switches on the device allow for easy programming. This call switch can also be used with any Selective or Distinctive Ring Service offered by local telephone companies in North America.  In Selective Ring (Distinctive Ring) mode, the unit will route inbound calls to the appropriate device based on the ring cadence of each distinctive ring number. Barge-in protection keeps your data transmission free from interruption. A busy signal is heard when other devices attempt to use the outgoing line. How does the Versa-Link ATX-250 work? The ATX installs on an analog phone line and answers inbound calls at the first sign of ring voltage. After the ATX goes off‐hook, it immediately screens for fax and DTMF transfer codes. During this processing period, a “ring back” tone is issued to the calling party. Once a transfer command is received, the call is routed to the corresponding port. In the absence of fax/transfer codes,the call is defaulted to device port #1. Outbound calls are processed in the normal fashion with barge‐in protection. Priority call over‐ride can allow a device on port #1 to interrupt any transmission for critical outbound calls. Product Overview The Versa-Link ATX-250 enables businesses to communicate with remote telecom and network assets more affordably,efficiently, and securely. The Versa-Link ATX-250 (ATX) allows two telephony devices to share a single telephone line, eliminating costly phone lines that routes calls based on CNG and DTMF tones or distinctive ring service. DIP switches located on the device let you easily change programming. The ATX automatically routes calls to phone, fax, or dial‐up modems,ensuring that the right resource is reached the first time. This consistent connectivity prevents time consuming dial‐backs and helps to streamline polling and data acquisition processes. The output jacks are labeled Device 1 and 2 leaving the user free to use any combination of communication devices. Although the most typical application is sharing voice and fax, the ATX-250 can also be used with fax and modem, two modems, voice and modem. In additions to sharing fax, ATX-250 can also be used for remote-site polling of cash registers, security monitoring systems, PC MODEMS, energy/climate control systems and LAN access switching, just about anything that you can connect to a phone line. In addition to cost savings and precise routing, the ATX is engineered to provide an additional layer of security to connected devices. Vulnerable pathways to equipment via the PSTN are protected by programmable Security Access Codes up to six characters.   Product Info. Online Manual Download Manual: ATX-250 Zip (605k)   ATX-250 PDF(834k) Versa-Link ATX-250 Online Brochure 1 Versa-Link ATX-250 Online Brochure 2 Versa-Link ATX-250 Online Brochure 3 Versa-Link ATX-250 Online Brochure 4 Features AUTOMATIC FAX DETECTION Pre-programmed to auto route fax calls to fax or fax modem. AUTOMATIC SWITCHING MODE Works with virtually all phone systems in the world. Answers all incoming calls, detects CNG/DTMF tones and routes to the specified destination. DISTINCTIVE RING MODE Works with the "Distinctive Ring" service offered by your local phone company. This feature is optional and provides 100% foolproof switching. DATA DISRUPTION PROTECTION Prevents active calls from interruption by another device connected to Versa-Link ATX-250. EASILY PROGRAMMABLE Program all features via telephone dip switches; no PC interface or drivers to install. CALL OPTI-MIZER A user-selectable features designed specifically for after-hours FAX transmission. Will route all unanswered calls to the FAX machine after a programmed number of rings. MANUAL TRANSFER CAPABILITY Transfer a call to any device port by touch tones. Calls can be manually transferred between the phone, FAX or MODEM at anytime by either the caller or the called party. PROGRAMMABLE SECURITY ACCESS CODES User defined transfer codes, up to 6 digits per port, restricts inbound access to equipment, provide to provide security and control. BELL SPEC RING-BACK TONES The Versa-Link ATX-250 transmits a "ring-back" that sounds just like the phone company's. NON-VOLATILE MEMORY Programming is preserved after a power outage. No need for reprogramming or battery backups. PROTOCOL TRANSPARENT Invisible to data transmissions. DUAL SURGE PROTECTION Phone line and AC input. A 300 Volt surge suppressor and fuses provide added protection for your sensitive telecommunications equipment. INCREASED RING ENERGY Rings more phones that any switches. REMOTE PROGRAMMING AND DIAGNOSTICS TWO YEAR LIMITED WARRANTY   Click to enlarge Click to enlarge Click to enlarge Click to enlarge Click to enlarge Click to enlarge

ATX-250
Tone or Distinctive Ring Detection Call Processor
(Two Devices)  
Your Price only $196.00 Delivered*

Call toll free (866) 337-0965 or (217) 337-0965 with your questions or to order by phone.

Products

Comments: info@faxswitch.com